Main features
BASED ON A NEW CONCEPT OF DRYER FOR NETS, THIS MACHINE DOESN’T USE GAS AND ALLOWS HUGE ENERGY SAVINGS.
Traditional drying systems work by introducing hot air into the dryer room, which increases the humidity level. This process extends the drying time with significant costs to keep the dryer room at a constant temperature for several hours.
This environmentally friendly machine is equipped with a special heat recovery system, which allows to keep the material dry, with an energy efficiency higher than the conventional system based on hot air.
Temperature and humidity controlled at every level, easy to use and low maintenance.
The drying process must necessarily take place in a closed and isolated room.
• Lenght: 3,18 m
• Width: 1,90 m
• Height: 2,02 m
• Weight: 400,00 Kg approx
• Drying capacity (40°C – 30% U.R.): Kg/t 55
• Nominal input power: Kw 27.5
• Max power absorbed: kW 36
• Maximum current absorbed: A 68
• Air capacity: m3/t 14000
• Refrigerant R407C: Kg 22,5
• Operating range temperature: °C 15-40
• Power supply: V/ph/Hz 400/3~+N/50-60
- Full remote diagnostic control and parameters setting from factory
- Electronic temperature control
- Electronic controller axial fan
- Control screen
- Control panel with a manual and automatic transmission device.
- Automatic switch-off at the end of the program.
Other products you could be interested in
Do you need more information or have any special requirements?
Feel free to contact Buraschi Italia using the form.
We will get back to you in a short time.